Macquarie 4x4 Centre | What's in the Shop

What's in the Shop The latest vehicles that have come through our workshop.

This section of our website is dedicated to some of the modifications that we are able to do, and that you might not be aware of.

Vehicle :200 series TDI GXL

Work Required:
Full fitout for the Variety Club NSW.

Comments: We recently fitted out the variety clubs official vehicle with UHF/VHF/SAT
phone communications and a fullcompliment of bar work and navigation
and trip measuring devices

See our Console page for more pictures of this vehicles interior.

Vehicle :HJ 75 Series Cab Chassis

Work Required:
Galvanise the Chassis

Comments: Morrie is a keen fisherman and wanted his beloved
75 to last the distance so we stripped it down and had the
chassis galvanised.

Vehicle :GU CAB Chassis

Work Required:
Portal Hub Diffs

Comments: Conroy wanted the ultimate off road ute so
we installed a set of Marks 4WD Portals to his truck.

Vehicle : Holden Brougham

Work Required:
Bash Build

Comments:Here is our Holden Brougham, we built up and
prepared to compete in the Variety Bash. We laminated the
lower arms, strengthened the lower crossmembers, new
shocks, springs, bushes, all steering components etc.
The car went faultlessly making the 7000km round trip in
14 days without an issue.

Vehicle :FJ75 Series

Work Required:
A Full Custom Build Up

Comments: This was our custom made extra cab 454 powered
75 Series, with Dana Diffs, 44 inch tyres, just to name a few things.
All custom work done at Macquarie 4x4.

Vehicle - BJ42

Work required:
Full custom build up

Comments: This was designed and built for one our of good
customers it has a v8 diesel,42 inch tyres,spring over conversion,
5 speed,custom rad in the rear,dual battery in the floor, roll cage
and the list goes on.

Vehicle - Toyota Hilux 05on

Work Required:
Roller Drawers

Comments : Dave needed some more storage that was lockable so
opted for the solid Outback Drawer Systems

Vehicle - Pajero

Work required:
Custom Sill Protectors

Comment : We manufactured this set of sill protectors and
attached them to the sub assembly and braced them up so as
to protect the sill area and be useful as a step

Vehicle - F250

Work Required:
F250 Below Kit

Comment: Joe needed to carry some weight without lifting the car and giving
him a hard ride. When not loaded so he opted for the bellows kit capable
of carrying another 1000kg.

Vehicle - Jeep Commander

Work required:
Full fit out

Comment: Brendan wanted to protect his commander so we upgraded the suspension
fitted a new bar and our custom sill protectors (see protection page)

Call now to see how we can help you 02 45877114